heres a pic of my eti amp,i need to fix it to this heatsink
it has 5 holes already in the bracket..only 2line up.
how many screws should i use? as many as possible
if i drill lots more holes,wont that reduce the amount of surface area contacting the heatsink..so how many?
should i use the existing 2,and drill 2 more,that makes it even.
or should i drill 4 more,making 6 screws in total
btw it doesnt need such a large heatsink,but later i might bridge it with another..
also im going to add some limiting transistors on output to stop it from drawing too much current.
<50watt into 8ohm amp class a/b>
also,should i smear heatsinking compound onto the bracket-heatsink face? it doesnt say to in the manual but it couldnt hurt if i have some left over.
it has 5 holes already in the bracket..only 2line up.
how many screws should i use? as many as possible
if i drill lots more holes,wont that reduce the amount of surface area contacting the heatsink..so how many?
should i use the existing 2,and drill 2 more,that makes it even.
or should i drill 4 more,making 6 screws in total
btw it doesnt need such a large heatsink,but later i might bridge it with another..
also im going to add some limiting transistors on output to stop it from drawing too much current.
<50watt into 8ohm amp class a/b>
also,should i smear heatsinking compound onto the bracket-heatsink face? it doesnt say to in the manual but it couldnt hurt if i have some left over.
Attachments
dont u love tiny webcams
sorry
there is already 5holes at about 27mm apart,but only the 2 end ones match up with heatsink..
about13cm long bracket and 30cm long heatsink
35mm long fins 10mm apart
should i put 2 screws each side near the transistors themselves,leaving none in the middle? or put 2 there too lol/.
sorry
there is already 5holes at about 27mm apart,but only the 2 end ones match up with heatsink..
about13cm long bracket and 30cm long heatsink
35mm long fins 10mm apart
should i put 2 screws each side near the transistors themselves,leaving none in the middle? or put 2 there too lol/.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.