Hi Gov,
the relay is just a remote switch that connects and disconnects the output from the output terminals.
The coil and it's rating is not in the audio circuit.
The DCB1 works with a range of coil currents. That's why you have the regulator and the dropping resistors.
the relay is just a remote switch that connects and disconnects the output from the output terminals.
The coil and it's rating is not in the audio circuit.
The DCB1 works with a range of coil currents. That's why you have the regulator and the dropping resistors.
Hi Gov,
the relay is just a remote switch that connects and disconnects the output from the output terminals.
The coil and it's rating is not in the audio circuit.
The DCB1 works with a range of coil currents. That's why you have the regulator and the dropping resistors.
Hi Andraw,
thank you for your answer, fernall is much easier for my ordering parts
Tea-bag, can you please confirm, I’ve sent money for 2 boards, 15 relays.
Your all set.
Here is the buy list so far. Username, board # and relay # orderd.
janpo 1 7
Rodeodave 1
1MOR 1 9
CxTurbo 10
qusp 6
Cobra2 15
dlhasha 1
mariush 2 7
tincanear 2 8
erikdebier 1 7
dshambal 3 7
10y 2
NightAnole 1
Horio 2 15
ramallo 2 7
lpm76 2 16
BDL 1 10
df_genius 2 0
aspringv 2 10
totohung 2
govilaurat 5
jameshillj 2 4
Marcocet 1 7
prooptiki 3 15
Nikon197 2 10
wuffer 7
particlem 2 7
torem 1 7
Ferrari 2 16
johnwmcl 2 15
presbel 10
maelcum 2 10
Russellc 1
hawall841 1 7
maillard 1 5
Eric 3 10
janpo 1 7
Rodeodave 1
1MOR 1 9
CxTurbo 10
qusp 6
Cobra2 15
dlhasha 1
mariush 2 7
tincanear 2 8
erikdebier 1 7
dshambal 3 7
10y 2
NightAnole 1
Horio 2 15
ramallo 2 7
lpm76 2 16
BDL 1 10
df_genius 2 0
aspringv 2 10
totohung 2
govilaurat 5
jameshillj 2 4
Marcocet 1 7
prooptiki 3 15
Nikon197 2 10
wuffer 7
particlem 2 7
torem 1 7
Ferrari 2 16
johnwmcl 2 15
presbel 10
maelcum 2 10
Russellc 1
hawall841 1 7
maillard 1 5
Eric 3 10
Pass DIY Addict
Joined 2000
Paid Member
Hi All,
Are the Hypnotize boards still available? I need 1 board and one 2pole relay for the boards.
Thank you
Francesco.
Morpheous,
Only the mesmerize boards are available.
They can still be used as a single or dual rail shunt supply.
I think this is the right one...resolution is not the best though.
Also see Tea-Bag's Blog: http://www.diyaudio.com/forums/blogs/tea-bag/173-old-style-dcb1-information.html#comment502
Also see Tea-Bag's Blog: http://www.diyaudio.com/forums/blogs/tea-bag/173-old-style-dcb1-information.html#comment502
Attachments
I think this is the right one...resolution is not the best though.
Also see Tea-Bag's Blog: http://www.diyaudio.com/forums/blogs/tea-bag/173-old-style-dcb1-information.html#comment502
Plot the KiCad to Clipboard, then import it into an Open Office doc, then export that doc to a PDF, works great...
- Home
- Group Buys
- GB for DC coupled B1 buffer with shunt PSUs