FS: Three Western Electric 417A / 5842 tubes
These were sold to me as NOS. They were all in their original boxes (which are worn and tattered) and were tested. There are test results of 120, 120, and 108 written on the boxes.
I used these for about an hour in my Tubelab SE to try them out and they sounded wonderful.
I cannot test these with my B&K707 Dynajet tester but they were tested by the man who sold them to me and I can confirm that they bias up and work properly in the TSE.
I am selling these to raise funds for a new project.
Feel free to ask any questions.
First REASONABLE offer takes them.
These were sold to me as NOS. They were all in their original boxes (which are worn and tattered) and were tested. There are test results of 120, 120, and 108 written on the boxes.
I used these for about an hour in my Tubelab SE to try them out and they sounded wonderful.
I cannot test these with my B&K707 Dynajet tester but they were tested by the man who sold them to me and I can confirm that they bias up and work properly in the TSE.
I am selling these to raise funds for a new project.
Feel free to ask any questions.
First REASONABLE offer takes them.
Attachments
FS: Zaph L18 Seas Speakers PAIR
This is a pair of Zaph's L18 speakers that I built a few years ago. They use the H1212/ 27TBFC/G tweeters and the L18RNX/P / H1224 7" woofers. These have the reduced baffle step version of the crossover which raises the efficiency and allows closer placement to the walls/ corners of a room.
Crossovers use Clarity cap and Solen caps and quality low DCR inductors. The cabinets are made of Baltic Birch Ply and have internal bracing which also braces the back of the woofer magnets.
They are lined 100% with whispermat and have dual-flared ports . There is a small scratch on one of the woofers ( see pics) but it is insignificant.
This is a great pair of speakers that I am only selling to raise funds for another project.
Price -250 euros.
I am located near Vienna, Austria and would consider delivery within circa 50km. Shipping will not be cheap.
This is a pair of Zaph's L18 speakers that I built a few years ago. They use the H1212/ 27TBFC/G tweeters and the L18RNX/P / H1224 7" woofers. These have the reduced baffle step version of the crossover which raises the efficiency and allows closer placement to the walls/ corners of a room.
Crossovers use Clarity cap and Solen caps and quality low DCR inductors. The cabinets are made of Baltic Birch Ply and have internal bracing which also braces the back of the woofer magnets.
They are lined 100% with whispermat and have dual-flared ports . There is a small scratch on one of the woofers ( see pics) but it is insignificant.
This is a great pair of speakers that I am only selling to raise funds for another project.
Price -250 euros.
I am located near Vienna, Austria and would consider delivery within circa 50km. Shipping will not be cheap.
Attachments
Last edited:
FS: TamRadio Sony 5K Single-Ended Output Transformers
FS: a pair of Sony/Tamradio japanese-made single ended output transformers. These are 5K to 8 ohm with a 600 ohm secondary as well.
45 euro plus shipping.
I am located near Vienna, Austria.
FS: a pair of Sony/Tamradio japanese-made single ended output transformers. These are 5K to 8 ohm with a 600 ohm secondary as well.
45 euro plus shipping.
I am located near Vienna, Austria.
Attachments
FS: Akai M8 5K Single-Ended Output Transformers
FS: A pair of 5K single-ended outputs from an Akai M8 reel-to-reel. These were used with EL84/6BQ5 tubes for about 5 watts in SE. These are japanese-manufactured and are of very good quality; they sound fantastic!
45 euros plus shipping.
I am located near Vienna, Austria.
FS: A pair of 5K single-ended outputs from an Akai M8 reel-to-reel. These were used with EL84/6BQ5 tubes for about 5 watts in SE. These are japanese-manufactured and are of very good quality; they sound fantastic!
45 euros plus shipping.
I am located near Vienna, Austria.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Vendor's Bazaar
- FS: Tubes and Parts, located in Vienna, Austria