I would gladly pay in advance for the ones I would order, I need for six channels...
Thanks, alex
Guys, sorry to be a pest, I would like to know what is the status of the process, I have everything else built, I'm waiting for the outputs. I would like 4 pairs...thanks, alex
I have you at 6 pairs but will change to 4.
Still working with luvdunhill to get them...sorry for the delay.
Are you talking about R11 and R12? Could someone confirm this change or point me to this discussion?Nelson has said to increase emmitors resistors value to 1 ohm when using these devices.
Are you talking about R11 and R12? Could someone confirm this change or point me to this discussion?
I have found the Nelson's reply.
This was concerning paralleled pairs. My recall was not quite exact, sorry.
http://www.diyaudio.com/forums/pass-labs/121228-f5-power-amplifier-641.html#post2016487
Sorry to everyone. Luvdunhill had not gotten back since he mentioned he has been too busy to get back with the supplier for the final pricing...it's been awhile and I'm afraid I don't have enough free time to do it. I'll give him a holler and find out.
I would also be interested if available ....
Thanks for that useful nugget, Bobodioulasso!I have found the Nelson's reply.
This was concerning paralleled pairs. My recall was not quite exact, sorry.
http://www.diyaudio.com/forums/pass-labs/121228-f5-power-amplifier-641.html#post2016487
This already got buried 6 pages deep...I sent luvdunhill an email about a week ago but no response...I don't know if he's just busy or has lost interest.
Anyway the good news is I found another source and will try to keep this going...I don't have all the free time though so patience from all of you is needed. Will post more when pairs have been matched....
Anyway the good news is I found another source and will try to keep this going...I don't have all the free time though so patience from all of you is needed. Will post more when pairs have been matched....
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.