Wouldn't disagree. That was was sort of what gave a feeling that the organist may have had the mix of stop settings a bit off balance in #613....some weight is added rather than some higher frequency content...
Here is a field recording in a sunken down square in central Stockholm. Concrete as far as the eyes can reach
Solo trumpet, mics 4 meter away low - I didn't rig the stand as this was made in a whim. I asked or permission to record. The man playing also held a speech / prayer - the level is adjusted as the trumpet was much stronger than the voice. Amazing what energy a single trumpet really has... I reflected while recording that the trumpet sounded quite small and thin.... he also gathered a lot of saliva which he had to pour out once in a while (hence some gargling/crackle.-.) - I edited these intermissions out
//
Solo trumpet, mics 4 meter away low - I didn't rig the stand as this was made in a whim. I asked or permission to record. The man playing also held a speech / prayer - the level is adjusted as the trumpet was much stronger than the voice. Amazing what energy a single trumpet really has... I reflected while recording that the trumpet sounded quite small and thin.... he also gathered a lot of saliva which he had to pour out once in a while (hence some gargling/crackle.-.) - I edited these intermissions out
//
Attachments
Anything new/different with the calibration or otherwise?
Regarding trumpets and the accumulation of "spit," its a well known issue. IIRC, trumpets have a spit valve which can be operated by the player exactly for the purpose of blowing out any accumulated liquid.
https://en.wikipedia.org/wiki/Water_key
Regarding trumpets and the accumulation of "spit," its a well known issue. IIRC, trumpets have a spit valve which can be operated by the player exactly for the purpose of blowing out any accumulated liquid.
https://en.wikipedia.org/wiki/Water_key
Last edited:
No change. But as I was thinking about the answer and became a bit unsure it dawned on me that I need to develop a version handling and file naming system to keep track which conversion process version a certain "release" was made form. I'm quite sure I'm not at the final variant so it will be needed.
//
//
A short snippet of "jass-jam"... no processing other than gain by bit-shift and down-sampling by CDSP (Nyquist true).
Minimum sample value -0.6410 -0.8256
Maximum sample value 0.7237 0.8390
Peak amplitude -2.8 dB -1.5 dB
DC offset -0.0000 -0.0000
Minimum RMS power -78.5 dB -78.5 dB
Average RMS power -19.9 dB -19.3 dB
Maximum RMS power -9.1 dB -7.4 dB
Clipped samples 0 0
//
Minimum sample value -0.6410 -0.8256
Maximum sample value 0.7237 0.8390
Peak amplitude -2.8 dB -1.5 dB
DC offset -0.0000 -0.0000
Minimum RMS power -78.5 dB -78.5 dB
Average RMS power -19.9 dB -19.3 dB
Maximum RMS power -9.1 dB -7.4 dB
Clipped samples 0 0
//
Attachments
Last edited: