schematic ?
Sorry, no.
It would be useless though,
as it is very difficult to find some parts,
and expensive as well.
Attachments
Thank you all for your kind words.
I made a mistake in the pics of post 18.
Here are the correct ones :
First pic is the output without a load, driven at full swing at 100KHz
In the second pic i have only changed the setting on the scope to measure
voltage (p-p). As you can see, its 142V p-p.
This test was performed to check the stability of the amp.
In my opinion, not all mosfet amps can do this.
I made a mistake in the pics of post 18.
Here are the correct ones :
First pic is the output without a load, driven at full swing at 100KHz
In the second pic i have only changed the setting on the scope to measure
voltage (p-p). As you can see, its 142V p-p.
This test was performed to check the stability of the amp.
In my opinion, not all mosfet amps can do this.
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Diy monoblock 700Wrms/2Ω