http://www.amazon.co.uk/dp/B0013ER00A/ref=pe_385721_37986871_TE_item
According to spec it goes from 22HZ to 4KHz.
Will be interesting to see how it performs in real life.
According to spec it goes from 22HZ to 4KHz.
Will be interesting to see how it performs in real life.
Tested mine awhile ago ,got 60 volts at 30 hz into it. Got stinky after 15 minutes. Using a green laser thru the spider looks to be about 10mm overhang. Observed approximately 1.125 inches of peak to peak motion at 60 volts.
Tested it with wt2 , T/S specs are not close to factory.
Guy on youtoob tested it up past 220 volts and it smoked out after 20 seconds or so
Tested it with wt2 , T/S specs are not close to factory.
Guy on youtoob tested it up past 220 volts and it smoked out after 20 seconds or so
Last edited:
Pistonic behaviour would suggest to limit bandwidth to 100-200 HzAccording to spec it goes from 22HZ to 4KHz.
Will be interesting to see how it performs in real life.
I found this..
http://www.mcmelectronics.com/content/ProductData/Spec%20Sheets/55-2366.pdf
Here's another to play with. 2 for the price of one..
MCM Audio Select 21'' Die Cast Professional Woofer - 800W RMS | 55-2985 (552985) | MCM Audio Select
http://www.mcmelectronics.com/content/ProductData/Spec%20Sheets/55-2366.pdf
Here's another to play with. 2 for the price of one..
MCM Audio Select 21'' Die Cast Professional Woofer - 800W RMS | 55-2985 (552985) | MCM Audio Select
I found a pdf datasheet and that says 1.7KHz upper limit at -3db.
I can only guess the spec I firs tread was at -6db.
I had trouble getting a 21 inch round grill for the Pyle so have gone with speaker grill cloth instead.
The Pyle seems to be on sale for $199 in the USA but I could only one in the UK for £216.
It was cheaper and quicker to buy the UK as postage on such a big speaker from the USA is expensive.
I can only guess the spec I firs tread was at -6db.
I had trouble getting a 21 inch round grill for the Pyle so have gone with speaker grill cloth instead.
The Pyle seems to be on sale for $199 in the USA but I could only one in the UK for £216.
It was cheaper and quicker to buy the UK as postage on such a big speaker from the USA is expensive.
iirc qts 0.312 , fs 37hz. But I'll have to find that printout.
I had two and ran them though Klippel, it came back with qts around 0.8 and fs around 25, both where around the same.
So spec's on them are all over the place. I think that Pyle build them using what ever they have on stock that will fit.
So one never knows what one gets
Here is a test to destruction video.
https://www.youtube.com/watch?v=dmZxuewSPzk
https://www.youtube.com/watch?v=dmZxuewSPzk
I look forward to hearing what you have to say about how it sounds. The trouble with Pyle is they are so inconsistent with their products. My only experience was one purchase and it was not so good but I have read good reviews on a number on their drivers. Their 2" driver gets good reviews from those that have bought it along with other drivers and products and then they sell some products that are not so good at any price. You cannot beat their prices if you get a decent item. I hope it works out great. $200 for a 21" subwoofer is a hard price to beat.
I currently have it running face down on a carpet.
It sounds a bit muffled but that is driving it with a full range signal.
After all it is a subwoofer.
I paid £216 which is about $334.
I could only find one supplier in the UK and that was on amazon.co.uk
The video I linked to earlier had it blow up at 2000watts but that was with a sine wave and not music.
My most powerful amp is only 250WRMS so it wont get stretched with me.
I wont get to test it for a while as i have to build the cabinet and I can only do that on days off.
I am also waiting for bass tubes.
It sounds a bit muffled but that is driving it with a full range signal.
After all it is a subwoofer.
I paid £216 which is about $334.
I could only find one supplier in the UK and that was on amazon.co.uk
The video I linked to earlier had it blow up at 2000watts but that was with a sine wave and not music.
My most powerful amp is only 250WRMS so it wont get stretched with me.
I wont get to test it for a while as i have to build the cabinet and I can only do that on days off.
I am also waiting for bass tubes.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Bought a 21 inch sub from Pyle.