Hi folk!
I'm currently developing an dedicated linear PSU for the DEQ/DCX which will replace the original PSU. I personally have a DEQ2496 and I'm looking for more details on the DCX. If a DCX owner can help?
I like to know the "working" voltage for the DCX inside the PSU in use with a close 95% use of the DSP board. To do this, you need to inject a signal on the input at 0dB et mesure voltages at the red points (see the inclosed pictures).
The dedicated board is 80 x 90 mm. The board will use 2 toroid transformers (2x9v or 2x7v, and 2x15v) or may be later a custom made transformer with all voltages. The size of these kind of transformer is 62x34mm. Can someone check if the board and the 2 transformers will fit in the DCX? (without the original PSU as well).
The board and the 2 transformers fit well in the DEQ2496.
More info on this thread:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=102277
Stephane
.
I'm currently developing an dedicated linear PSU for the DEQ/DCX which will replace the original PSU. I personally have a DEQ2496 and I'm looking for more details on the DCX. If a DCX owner can help?
I like to know the "working" voltage for the DCX inside the PSU in use with a close 95% use of the DSP board. To do this, you need to inject a signal on the input at 0dB et mesure voltages at the red points (see the inclosed pictures).
The dedicated board is 80 x 90 mm. The board will use 2 toroid transformers (2x9v or 2x7v, and 2x15v) or may be later a custom made transformer with all voltages. The size of these kind of transformer is 62x34mm. Can someone check if the board and the 2 transformers will fit in the DCX? (without the original PSU as well).
The board and the 2 transformers fit well in the DEQ2496.
More info on this thread:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=102277
Stephane
.