Hello, i would like to connect an aux output from my mixer: ZED-24 - Allen & Heath to my cell phone(Nokia 105 - Full phone specifications) microphone input.
I used this cable http://galleryplus.ebayimg.com/ws/web/271503712485_1_0_1/1000x1000.jpg
but did't work.
What i have to do?
I used this cable http://galleryplus.ebayimg.com/ws/web/271503712485_1_0_1/1000x1000.jpg
but did't work.
What i have to do?
aux output to microphone input !
Has the phone Actually got a Mic input ? I can see it has a 3.5mm stereo output though. If you want to feed audio directly into the phone, i'm not sure if it can be done. Even if it could, & it was meant for a stereo Mic, you would need more than just a cable. The output from your mixer would be too high, so would require attenuating. Which would most likely you having to make a special lead with attenuating resistors included.
That cable is for Video & stereo Audio ! It has 4 connections, not 3, so no good ayway.
Has the phone Actually got a Mic input ? I can see it has a 3.5mm stereo output though. If you want to feed audio directly into the phone, i'm not sure if it can be done. Even if it could, & it was meant for a stereo Mic, you would need more than just a cable. The output from your mixer would be too high, so would require attenuating. Which would most likely you having to make a special lead with attenuating resistors included.
That cable is for Video & stereo Audio ! It has 4 connections, not 3, so no good ayway.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.