@George or Salas
What volume pot are you using: TVC, attenuator, etc.?
20K step resistor attenuator. Up to 50k is OK.
Yes, I use the TVC only with the #26 or by itself.
In my initial experiments with the #26 I used an attenuator. When I rebuilt it, too many things changed so I can not give you a direct comparison.
I think that you have the TVC in a separate box, so you can easily compare.
With the 6V6 only with a cheap pot and is the one I like most. Will try something better when funds allow and I rebuilt the 6V6. Mind you it' s the buffer version.
In my initial experiments with the #26 I used an attenuator. When I rebuilt it, too many things changed so I can not give you a direct comparison.
I think that you have the TVC in a separate box, so you can easily compare.
With the 6V6 only with a cheap pot and is the one I like most. Will try something better when funds allow and I rebuilt the 6V6. Mind you it' s the buffer version.
Nice to know we agree!
If need a pre with gain depends of the gain of your phono, gain of your power amp, sensitivity of your speakers and listening room. If possible set your pre as buffer, you will get more drive for your power amp and interconnects in most cases.
Been there, done that!
If need a pre with gain depends of the gain of your phono, gain of your power amp, sensitivity of your speakers and listening room. If possible set your pre as buffer, you will get more drive for your power amp and interconnects in most cases.
Been there, done that!
As promised I try cathode follower without ft3 using simply and old pio (the ones i'm waiting came from Siberia....) and the result Was exciting .... Some litle noise due (i'm sure) to a poor cabling but a very very consistent song i like it very much.
Next step: new caps, a decent cabling and a beautsiful box!
http://mailtouch.rossoalice.alice.it/cp/applink/mail/Downloader?dhid=attachmentDownloader&messageId=19252&accountName=DefaultMailAccount&folderPath=INBOX&contentDisposition=attachment&attachmentIndex=0&u=santorofamily&d=alice.it&t=7629117d22d768119844&s=700311325460
Next step: new caps, a decent cabling and a beautsiful box!
http://mailtouch.rossoalice.alice.it/cp/applink/mail/Downloader?dhid=attachmentDownloader&messageId=19252&accountName=DefaultMailAccount&folderPath=INBOX&contentDisposition=attachment&attachmentIndex=0&u=santorofamily&d=alice.it&t=7629117d22d768119844&s=700311325460
George used 50K ladder in place of TVCs in my #26, now I understand why you said "lack of bass using #26" the issue is'n the preamp is the TVC
At the input the pot I suppose?
As promised I try cathode follower without ft3 using simply and old pio (the ones i'm waiting came from Siberia....) and the result Was exciting .... Some litle noise due (i'm sure) to a poor cabling but a very very consistent song i like it very much.
Next step: new caps, a decent cabling and a beautsiful box!
http://mailtouch.rossoalice.alice.it/cp/applink/mail/Downloader?dhid=attachmentDownloader&messageId=19252&accountName=DefaultMailAccount&folderPath=INBOX&contentDisposition=attachment&attachmentIndex=0&u=santorofamily&d=alice.it&t=7629117d22d768119844&s=700311325460
Nice initial result. Congrats. Attachment link failed though. Use advanced reply options here to upload it via the manage attachments menu.
At the input the pot I suppose?
Yes input pot without output TVC, try in your #26 and let me know.
P.S. Salas sorry in advance for OT
Happy New Year
Has anyone tried a 4p1l in this preamp yet?
No as far as I have seen in this thread.
- Home
- Amplifiers
- Tubes / Valves
- 6V6 line preamp