If I was to make a unit that had 3 complete un changed TA2020 amps off ebay - say like this one
Lepai TA2020 Class T Amp Mini Stereo Amplifier +Adapter - eBay (item 290407411661 end time Mar-28-10 07:43:34 PDT)
Would I be able to just split the input into 3 channels and feed it to each ?
Of course power supply - I can split that. 12-18V and say 6+ amps.
But will the input signal degrade too much if I split it 3 X.
Then if I build a tube buffer like a 12AU7, would it be 1 for the whole thing in front of all the splitting, or do I have to put one per channel ?
Thanks in advance guys.
Cool.
Srinath.
Lepai TA2020 Class T Amp Mini Stereo Amplifier +Adapter - eBay (item 290407411661 end time Mar-28-10 07:43:34 PDT)
Would I be able to just split the input into 3 channels and feed it to each ?
Of course power supply - I can split that. 12-18V and say 6+ amps.
But will the input signal degrade too much if I split it 3 X.
Then if I build a tube buffer like a 12AU7, would it be 1 for the whole thing in front of all the splitting, or do I have to put one per channel ?
Thanks in advance guys.
Cool.
Srinath.
Oh, the kenwood I have and am using now to run the 1 chip amp I got I am running it out of the headphone jack since it has volume control. Now that output can be split ?
Also how much distortion is sent out of the preamp side of the receiver ?
Thanks in advance.
Cool.
Srinath.
Also how much distortion is sent out of the preamp side of the receiver ?
Thanks in advance.
Cool.
Srinath.
Oh I had another Idea.
Could I get 3 of these -
2 x 68 Watt LM3886 + NE5532 Audio Amplifier Board Kit - eBay (item 260566539193 end time Mar-13-10 16:00:15 PST)
And that has a NE5532 pre amp circuit on the board. So I split them X3 and then the pre amp gets them stronger before the amp amplifies them.
They even have those with tube based pre amps and I being clueless get confused easy.
Cool.
Srinath.
Could I get 3 of these -
2 x 68 Watt LM3886 + NE5532 Audio Amplifier Board Kit - eBay (item 260566539193 end time Mar-13-10 16:00:15 PST)
And that has a NE5532 pre amp circuit on the board. So I split them X3 and then the pre amp gets them stronger before the amp amplifies them.
They even have those with tube based pre amps and I being clueless get confused easy.
Cool.
Srinath.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.