Hmm. After all that I see the MIC502YM is obsolete and unavailable! Back to the drawing board.
I have some MIC502 in DIP8 case on stock ... PM/email me if you want some.
BR, Toni
Homecinema in "full production" - only top speaker for Auro 3D still missing but already in work.
- all 4 corners equipped with bass traps
- absorbers "everywhere" also on top in color black to "black optimize" the cinemascreen.
- SA2012 4 channel high end Class D driving 4 subs
- SA2014 4 channel driving front speakers
- Denon AVC-X8500H driving other speakers
- Panasonic UHD player and 4K Sony laser projector
- (other SA20XX amps currently not mounted - rack to mount them is not yet finished ...)
Top speaker mounted - ready for 13.1 channel Auro3D, Dolby Atmos, DTS-X
Attachments
Yes, it would be perfect for a heat spreader. Tapped M3 and M4 for mounting PCB. Dimensions from .dxf you sent me by email.
Total machine time was 8 minutes. Better than doing it by hand!
It's actually quite hard to get a good photo. the surface is very shiny (faced with diamond tipped tool)
Total machine time was 8 minutes. Better than doing it by hand!
It's actually quite hard to get a good photo. the surface is very shiny (faced with diamond tipped tool)
Attachments
Thx! Monsteramp ...Nice looking tower Toni!
It looks like you can test everything!!!
Waiting new projects....
Thx too! That's why the rack has "wheels".Looking good Tony, but your are going to have problems getting to your cables against the wall !
Thats really fine! I'm sure you will do a chassis cnc machined from a solid aluminium block...
BTW, my SA2014 boards are 99% complete and I'm very happy with how they turned out. Soon I can start construction of the chassis [emoji482]
Have fun, Toni
Where is the AP?... ready for new projects ...
- Home
- Amplifiers
- Solid State
- 2stageEF high performance class AB power amp / 200W8R / 400W4R