This is to check if there is sufficient demand to warrant a second groupbuy of Aikido pcb's and or psu board.
Aikido PCB is US$ 9,50 (50cents go to John Broskie)
PSU PCB is US$ 9
Please post your name with quantity.
This is not a promise to do the groupbuy but to see if it would be worthwile.
Aikido PCB is US$ 9,50 (50cents go to John Broskie)
PSU PCB is US$ 9
Please post your name with quantity.
This is not a promise to do the groupbuy but to see if it would be worthwile.
Not really...since John Broskie will offer such pcb's.An thought of redesigning it so it can also take octals?
That would be possible if you are willing to use a wire from pcb to socket. I'll wire one up with loctals some time...Octal support would be great
Hi Phil,Hi Bas, I would like one of each please.
Unless you want a mono preamp...you'd have to get 2 aikido's pcb's and one psu pcb.
Regards,
Bas
An externally hosted image should be here but it was not working when we last tested it.
The psu can be used to power 2 channels..but it seems a lot of folks want to use true dual mono..in that case you can leave out 1 of the last two rc networks.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- 2nd Aikido PCB and PSU groupbuy