Boy, you are *really* pissed off.Oh my. Can't you read the schematic from the PCB picture in the first post??
Anyone familiar with amplifiers topology will be able to read quickly because in amplifier topology there is nothing new (under the sun).
And no, I can't "read" the schematic from a poor picture which shows only the top side, and an angle.
I don't have X-Ray eyes to see the tracks.
Not even the parts values are readable, go figure.
And anyway, why should I?
It's you and andrewlebon who are the Detex salesmen
At least do the things right to earn your commission
And this thread should be moved by a moderator to the Sales section.
Boy, you are *really* pissed off.
And no, I can't "read" the schematic from a poor picture which shows only the top side, and an angle.
I don't have X-Ray eyes to see the tracks.
Not even the parts values are readable, go figure.
Hehehe okay may be it's me who has built too many amps
I'm not pissed off. Just a little bit surprised. At least I know that the sky is the limit for everything.
Hienjoy....
are you try and test this simple amp before ?
which resistor is feedback resistor ?
thanks
People do not trust even in it's own shadows
They cannot accept pure hearts because their own are not that pure.
relax Andrew...this will turn worse and worse.
This is the way things goes...they will beat on you till people block, delete or move the thread.
A pity, but mods do that when people ask them to move on.
Nice amplifier my dear detex man...ahahahahahahah!
From time to time these guys drives me mad, despite the lack of schematic provision is really strange detex (hohohohohoô)
Carlos
They cannot accept pure hearts because their own are not that pure.
relax Andrew...this will turn worse and worse.
This is the way things goes...they will beat on you till people block, delete or move the thread.
A pity, but mods do that when people ask them to move on.
Nice amplifier my dear detex man...ahahahahahahah!
From time to time these guys drives me mad, despite the lack of schematic provision is really strange detex (hohohohohoô)
Carlos
Attachments
Last edited:
does anybody have the circuit diagram for the micron 741a 150w amplifier?
How is that possible. The output voltage swing is limited by 741a....
They have voltage gain in the output stage.
10X or something like that.
The 741 swings a few volts only.
Not exactly a stable configuration.
That sounds more possible, but it cant be simple. I guess it will be more complicate than full discrete one.
how many voltage that used? + 35vdc, or + 45 vdc?300W Micron Amplifier by IC LM741 NICE SOUND
warm regards
Sameerx1
regards
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- SIMPLE AMP