Why did you cut the boards , the sad part is , when toe asked me to accept boards for testing , i passed on them , feeling i would not have had the time to do them right away ...
Little did i know ......
I didn't pass on them. Got 2 pairs!
Only built one channel though.
Too many amps, so little time.
Rush
Why did you cut the boards , the sad part is , when toe asked me to accept boards for testing , i passed on them , feeling i would not have had the time to do them right away ...
Little did i know ......
i said the same thing. but he insisted the reason for cutting them is heat.
in this manner, i can get the heat spread more even across the 2x 10.080" heatsinks. so they can handle the 250W dissipation pr ch.
I didn't pass on them. Got 2 pairs!
Only built one channel though.
Too many amps, so little time.
Rush
be awere of the foults.
be awere of the foults.
I was the one who identified the faults.
Rush
I didn't pass on them. Got 2 pairs!
Only built one channel though.
Too many amps, so little time.
Rush
Well I'm a few minutes from you , so i guess no problem collecting a Pr ...
I was the one who identified the faults.
Rush
is it V2 or V3 boards you have?
Does this mean i dont have to finish my V3
Brooklyn would have had a bridge by now ....
Here is the most wanted person, I continue seated waiting PSU F5T2.
http://www.diyaudio.com/forums/tubes-valves/151421-26-pre-amp-225.html
http://www.diyaudio.com/forums/tubes-valves/151421-26-pre-amp-225.html
How about these? Got them in yesterday afternoon!
I've got 3 people signed up to build them to make sure they work perfectly but don't know how long they'll take. However if a lot of people want boardsets and are willing to take them "as is" then we could probably let a few more go.
If there turns out to be something wrong with the boards, you would have to either mod them, or order replacement boards which we could supply at a reasonable cost plus shipping. Of course since there are 3 board types, the gain board which can be snapped in half, and a P channel output bd. and an N ch. one, it's unlikely that more then one would be bad..
We're planning to sell the boards as a set - one 2ch gain stage bd. and 2 N ch output bds and 2 p ch output bds.
Anyway- enjoy the view!
Mark
We recommend waiting!
I've got 3 people signed up to build them to make sure they work perfectly but don't know how long they'll take. However if a lot of people want boardsets and are willing to take them "as is" then we could probably let a few more go.
If there turns out to be something wrong with the boards, you would have to either mod them, or order replacement boards which we could supply at a reasonable cost plus shipping. Of course since there are 3 board types, the gain board which can be snapped in half, and a P channel output bd. and an N ch. one, it's unlikely that more then one would be bad..
We're planning to sell the boards as a set - one 2ch gain stage bd. and 2 N ch output bds and 2 p ch output bds.
Anyway- enjoy the view!
Mark
We recommend waiting!
Attachments
Last edited:
How about these? Got them in yesterday afternoon!
I've got 3 people signed up to build them to make sure they work perfectly but don't know how long they'll take. However if a lot of people want boardsets and are willing to take them "as is" then we could probably let a few more go.
If there turns out to be something wrong with the boards, you would have to either mod them, or order replacement boards which we could supply at a reasonable cost plus shipping. Of course since there are 3 board types, the gain board which can be snapped in half, and a P channel output bd. and an N ch. one, it's unlikely that more then one would be bad..
We're planning to sell the boards as a set - one 2ch gain stage bd. and 2 N ch output bds and 2 p ch output bds.
Anyway- enjoy the view!
Mark
We recommend waiting!
Very nice looking "Christmas like" boards. I like Red and Green.
Great job!
Rush
Very nice looking "Christmas like" boards. I like Red and Green.
Great job!
Rush
Rush, Thats red and gold. Maybe you should get your head checked out!
Rush, Thats red and gold. Maybe you should get your head checked out!
I knew it was gold, it kind of looked green as I am in the Christmas spirit.
I am green with envy.
Rush
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- F5 Turbo Circuit Boards