DC protector for B500
Mr. mile DC surge protector is whether it can be used for the B500?
Regard
Schematic of Speaker Terminal.
Mr. mile DC surge protector is whether it can be used for the B500?
Regard
Why do you think 4x10000uF/100V per channel is to small?
Question Apex.
Can I use two (2) pieces of Electrolytic Capacitor with the value of 27,000μF /100v each to your PSU Diagram reference #142 for SR200? if I able to use this 2 Capacitor, will you please help and send me the revised diagram. Sorry for my bad english
Mr. mile DC surge protector is whether it can be used for the B500?
Regard
Yes Speaker Terminal can be used for B500.
Question Apex,
1. Can i use use two (2) Pc's Electrolytic Capacitor with the value of 27,000μF /100v
each to your PSU Reference #142?
You can use two caps 27,000uF/100V for unregulated PSU. Caps 10,000uF/100V on regulated PSU is not conected in paralell
Question Apex.
Can I use two (2) pieces of Electrolytic Capacitor with the value of 27,000μF /100v each to your PSU Diagram reference #142 for SR200? if I able to use this 2 Capacitor, will you please help and send me the revised diagram. Sorry for my bad english
Thank you very Much Apex
May i request the parts list for HV23 and procedure on how to set the vias using Analog or Digital Multi Tester. this is my email john_walz88@yahoo.com once again, thank you very much Apex for your time and effort.
Thank you very Much Apex
May i request the parts list for HV23 and procedure on how to set the vias using Analog or Digital Multi Tester. this is my email john_walz88@yahoo.com once again, thank you very much Apex for your time and effort.
Set 50mV on 0R47/5W resistors, it's 100mA bias current. If you have large heatsink set 100mV (bias 200mA).
Regards
GREAT!
GREAT!
slow progress and messy but surely will finish this one
GREAT!
Wouldn't that be a bit too much? If there is 100mA at one resistor that would be almost/about 400mA in total and at 150V from + to - ...a lot of dissipation,or you ment to say 100-200mA in total for all? Sorry for my complicating relatively simple answer...
Set 15mA on 0R47/5W for 30mA per mosfet (120mA total)
slow progress and messy but surely will finish this one
Looks like 'The Very Best Amplifier I Have Ever Heard!!!!'
Don't forget 'Speaker Terminals' with Zobel network and DC protect.
Regards
slow progress and messy but surely will finish this one
Nice Work!!!, where did you get your heat sink and Torroids in Dubai??? Also i notice something special on your PCB etching process really nice and i like it, can you share your etching methode??? sorry to ask bro but i like it...
Please send it on my mail wiljj78@yahoo.com.
Many thanks in advance.
Regards,
Wiljj78
Nice Work!!!, where did you get your heat sink and Torroids in Dubai??? Also i notice something special on your PCB etching process really nice and i like it, can you share your etching methode??? sorry to ask bro but i like it...
Please send it on my mail wiljj78@yahoo.com.
Many thanks in advance.
Regards,
Wiljj78
hi junie,
marvellous job i like it.fantastic
Working on the Back Panel
Thanks Borina, Mile and Masood.
Willy, PCB making I followed the guide from here https://www.youtube.com/watch?v=tWnfnt2rNO0, the materials are available in DUBAI from Popular Electronics.
Pile-up office works makes my project slow but i have 4 days off and today I managed to finish the back Panel.
Thanks Borina, Mile and Masood.
Willy, PCB making I followed the guide from here https://www.youtube.com/watch?v=tWnfnt2rNO0, the materials are available in DUBAI from Popular Electronics.
Pile-up office works makes my project slow but i have 4 days off and today I managed to finish the back Panel.
Hello John, Thanks.
The heatsink also is DIY you know this part of the world we lived you need to be resourceful to make things great, it turn out good anyways
The 10K resistor? Are you talking about the LC and RC network?
The RC network I got the issue (it's HOT!!) before but after added the missing cap it's stable now.
The heatsink also is DIY you know this part of the world we lived you need to be resourceful to make things great, it turn out good anyways
The 10K resistor? Are you talking about the LC and RC network?
The RC network I got the issue (it's HOT!!) before but after added the missing cap it's stable now.
- Home
- Amplifiers
- Solid State
- Studio Reference Amplifier