• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Custom power tranny specs recommendations for 300B pse monoblocs

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
D

duderduderini

Member
Joined 2004
Hey
I will be building Parallel Single ended 300b amps and want to order 2 power trannys for them.
I will be using Pete Milletts dc regulator for all the valves.
If i want say 6.3v at 2 amps dc regulated, what output should the power tranny have to account for regulation and losses?
Ditto for the 300bs... I want 5 v at 1.5 amps (x2 of course) so what value should i ask for there?
I am a bit hazy on this so I would appreciate help.
Finally given I will be using cathode bias for the 300b's what would be recommendation for HT supply
Thanks again
Nick
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom