According to the manual, the output pair should run at 450 to 500 mA quiescent. This can be measured by inserting a 1R0 resistor into the fuseholder and measuring 0.45-0.5V across the resistor. The amp should be running for 2-4 hours at the normal ambient temperature before the final settting is made. You may need to adjust the dc offset as well.I have a CounterPoint SA-12 that I just repaired but can not find the correct BIAS current setting for the outputs (orginal MOSFET). Can anyone help with this setting.
You may consider a lower quiescent current in the interest of preserving the ageing components in your amplifier.
Alan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.