Hello I'm about to finish assembly of my second tubelab project the SE. I know the wiring diagram was lost due to a hard drive crash and so is no longer on the Tubelab site. I was able to confirm all transformer connections from various threads but have been unable to find anything on the volume and input wiring.
By looking at the schematics it seems that the connections are as follows
L&R-1 = one side of volume pot
L&R-2 = wiper of volume pot
L&R-3 = other side of volume pot
L&R-4 = center Rca (+)
L&R-5 = outer Rca (ground)
Can someone confirm this for me? Thanks!
By looking at the schematics it seems that the connections are as follows
L&R-1 = one side of volume pot
L&R-2 = wiper of volume pot
L&R-3 = other side of volume pot
L&R-4 = center Rca (+)
L&R-5 = outer Rca (ground)
Can someone confirm this for me? Thanks!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.