• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Buffalo-IIIsePro ES9038

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

szczemirek

Member
Joined 2012
SOLD - Buffalo-IIIsePro ES9038

Buffalo IIIsePro DAC is fully assembled and working with a Raspberry Pi, it’s set up as an i2c DAC with a switchable SPDIF x 4 input so is ready to become part of a system with little to no extra work.

Buffalo-IIIsePro ES9038 2-Channel DAC w/Full Series Regulator Set

Consists of:
(1) Buffalo-IIIsePro32 (ES9038) 2-Channel DAC Module (Assembled and Tested)
(1) AVCC-SR Dual 3.6V Series Regulator Module (Assembled and Tested)
(2) TridentSR 3.3V Series Regulator Module (Assembled and Tested)
(1) TridentSR 1.3V Series Regulator Module (Assembled and Tested)
[1] Mercury v1.1 Kit plus [1] Placid HD BP Power Supply Kit
[2] LCDPS assembled and working fine
[1] 4:1 Mux/Demux Digital Switch Kit
[1] 4-Position Selector Switch Kit that Connects to the 4:1 Mux/Demux with included cable/connector
[3] Transformers

extras
[1] Raspberry Pi Model 3
[1] Touch Screen with a little scratch (see photo). Sorry.
IEC Power and boot
Custom panels
Wood and feet
Single Ended RCA and Balanced XLR Connectors

I am asking for £xxx.

​
1.jpg
3.jpg
4.jpg
inside.jpg
screen.jpg

​
I hope this time everything working.​
Thank you.
​
​
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom