wanted class A amp upto 200watts per channel into 8ohms w.h.y.you can email me details of anything of interest to
paul39ish@fsmail.net
paul39ish@fsmail.net
KRELL KSA100
on ebay price it´s to high...
http://cgi.ebay.de/Krell-KSA-100-En...5QQihZ018QQcategoryZ22509QQrdZ1QQcmdZViewItem
He say´s weght will be 70kg
on ebay price it´s to high...
http://cgi.ebay.de/Krell-KSA-100-En...5QQihZ018QQcategoryZ22509QQrdZ1QQcmdZViewItem
He say´s weght will be 70kg
How much power does the KSA160 put out in ClassA?
It might be getting close.
But seriously, 200W of pushpull ClassA is some target you've set yourself.
Single ended would be even worse for heat dissipation.
The 100W of ClassA from the KSA100 dissipates about 270W per channel and probably runs at about 600 to 700W when ticking over.
A 200W amp will probably be double this. Yes, about 1400W of quiescent consumption and the same heating power pushed into the listening room.
It might be getting close.
But seriously, 200W of pushpull ClassA is some target you've set yourself.
Single ended would be even worse for heat dissipation.
The 100W of ClassA from the KSA100 dissipates about 270W per channel and probably runs at about 600 to 700W when ticking over.
A 200W amp will probably be double this. Yes, about 1400W of quiescent consumption and the same heating power pushed into the listening room.
Dxvideo said:I think you cannot have any answer. Because I am working on a 20W Class A project (just 20W) and I cannot handle even its thermal problems. It needs 0.2 C/W heatsink.
I cannot imagine how much heatsink does a 200W Class A need...
Exactly my thought
For real class A you need about 5 times the output power...at idle
Magura
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.