Another enigma with my "Enigma"
 User Name Stay logged in? Password
 Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read Search

 Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Brian Steele
diyAudio Member

Join Date: Nov 2007
Another enigma with my "Enigma"

I called the rebuild of an old 4th order BP system I built an "enigma" because the FR does not match the prediction from the sim (bandwidth is wider by a noticeable amount, and the passband response tilts a little downwards rather than upwards as expected).

I've run into another "enigma" with this build. The raw response of the original build shows a significant peak just under 400 Hz, a peak that decreased significantly in magnitude when I cut the vents down a bit to "fix" the passband.

I thought that peak had something to do with the pipe resonance of the vents and their interaction with the enclosure, as it increased slightly as I cut down the vents. In fact, I was thinking of using this effect to determine best size and location for a vent in an enclosure, by trying to figure it out mathematically.

However, apparently that peak in the out of band response has nothing to do with the pipe resonances of the vents.

The pipe resonance frequencies for a pipe that's open at both ends is given by the equation: F(n) = =n*c/(2*(L+0.8*D)), where n-1,2,3.., c=speed of sound (m/s), L = length of the pipe (m), and D = diameter of the pipe (m). The "Enigma" sub has two 3" vents that are effectively 21.5 cm long. Using c=344m/s, F(1) works out to 623 Hz, much higher than that ~400 Hz peak, suggesting that it has nothing to do with pipe resonance effects.

So, where is that 400 Hz resonance peak coming from?

My next guess is that it's primarily some sort of resonance mode caused by the dimensions of the rectangular box that makes up the vented section of the subwoofer, which I think is closer to the truth. However, with internal dimensions of 38.1 x 31.8 x 21 cm, the lowest resonance modes work out to be 451 Hz, 542 Hz and 821 Hz. In the attached image, I've added a vertical red line indicating the enclosure's lowest resonance mode, which is still noticeably off from that 400 Hz peak.

What could it be? Any ideas?
Attached Images
 I20180813-NF10-BP (unstuffed).png (54.6 KB, 338 views)
__________________
www.diysubwoofers.org

Brian Steele
diyAudio Member

Join Date: Nov 2007
Right after posting my question, I think I found the answer .

I redid the Hornresp model for my 4th order BP build, this time modeling it as an offset driver horn, with the vented section being the "horn". Basically I used S1-S2,S2-S3 and L12 and L23 to describe the net volume vented section and the location of the driver within it, S3-S4 and L34=0.01 to simulate the step down to the vent's diameter, and then S4-S5 and L45 to simulate the vent. It's not perfect (perfect alignment with the sim would require that the vent be mounted outside of the box, not inside of it), but the 400 Hz peak, and subsequent dip shows up in the sim.

This opens up some interesting things:

1. The out of band noise exiting a 4th order BP's vent can be modeled in some circumstances.

2. It may be possible to reduce this out of band noise by choosing appropriate cabinet dimensions and the location of the driver within the cabinet. The effect can also be modeled before building the enclosure.
Attached Images
 2018-08-13.png (23.2 KB, 337 views) I20180813-NF10-BP (unstuffed) (HR).png (68.5 KB, 333 views)
__________________
www.diysubwoofers.org

Brian Steele
diyAudio Member

Join Date: Nov 2007
...and here's how that 400 Hz peak can be addressed by just moving the driver a few cm in the enclosure, according to the Hornresp sim. I've also sim'd the addition of some stuffing to the vented section. Now, the only out of band stuff appears above 600 Hz, where it's a bit more easier to deal with, and also measures quite a bit lower than the sim suggests. Wins all around.
Attached Images
 2018-08-13 (1).png (25.2 KB, 329 views)
__________________
www.diysubwoofers.org

 14th August 2018, 03:49 AM #4 freddi   diyAudio Member     Join Date: Aug 2005 that's quite an improvement !
 14th August 2018, 04:08 AM #5 USRFobiwan Horn Addict diyAudio Member     Join Date: Oct 2014 Location: Haarlem very interesting find Brian! How do you translate the placement of the driver in the simulation to the actual position of the driver in the design? __________________ Destroyed some nostalgia For the love of Horns and glory of pressure waves.
Brian Steele
diyAudio Member

Join Date: Nov 2007
Quote:
 Originally Posted by USRFobiwan very interesting find Brian! How do you translate the placement of the driver in the simulation to the actual position of the driver in the design?
The attached diagram serves to illustrate how I laid out the model.

Note that as the vents are inside of the enclosure, I worked out the volume they displaced in the enclosure, then adjusted S1 (=S2 = S3) so that when it was multiplied by L12+L23, the result was the net volume of the vented section of the enclosure. Also, as there are two vents, I doubled the CSA of one vent to represent S4.

I was actually quite surprised that the model turned out to be so close to what was measured. This enclosure was built many years ago, when I was using lumped-mass modeling, and with that type of model, the location of the driver in the enclosure doesn't make a difference. It's evident from the Hornresp model that the position of the driver actually DOES make a difference, and can impact the amount of out of band noise that can make its way out of the enclosure.
Attached Images
 20180203_070321 - Copy.jpg (288.6 KB, 284 views)
__________________
www.diysubwoofers.org

Last edited by Brian Steele; 14th August 2018 at 05:44 AM.

 20th August 2018, 05:04 AM #7 GM   diyAudio Member     Join Date: Jun 2003 Location: Chamblee, Ga. Yeah, that's been the assumption and I still promulgate it for cubes, vent location because it's mostly true, but learned long ago that driver location is ~fixed at ~50% for low aspect ratio rectangles, sliding up for inverse tapered and down a bit for horn tapered. I pointed this out to a then prominent designer, but was brusquely told to educate myself at a local college library before posting again, so not being interested enough to do what it took to prove it....... fast forward to MJK's software, which simmed it at ~42% made me wonder if the crude measurements I'd done could be this far off and now HR at ~51% makes me feel much better! GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.
 3rd November 2018, 12:52 AM #8 mwmkravchenko   Mark Kravchenko diyAudio Member     Join Date: Jan 2002 Location: Perth Canada Pretty interesting work Brian. Now you have to build a box with your driver offset and shelf ports to prove out the simulation. Kind of blows me away that a speaker simulation tool that started decades ago on punch cards is still current with your design work. I guess physics doesn't change after all! __________________ Mark www.kravchenko-audio.com
Brian Steele
diyAudio Member

Join Date: Nov 2007
Quote:
 Originally Posted by mwmkravchenko Pretty interesting work Brian. Now you have to build a box with your driver offset and shelf ports to prove out the simulation.
I actually have another 4th order BP on hand at the moment, a smaller one that built before the "Enigma" that has a similar "offset drive" arrangement. When I get the chance, I'm going to perform some more measurements on that one as well to see if the shape of the out of band noise from that build matches an offset driver sim of that build. However, the shape of the response curve does suggest that there is some nulling going on that's not predicted by the current Hornresp BP4 sim (see attached - the null is appearing just above 600 Hz - the peak just above that is damped by the damping material that I have in the vented section of the system).

Another thing I noticed with these builds is that the shape of the response curve can change a bit at different power levels, some times in strange ways. For example, for this smaller enclosure, it looks like the system gets MORE efficient (by about 1.2 dB @ 80 Hz) as power is increased.
Attached Images
 20181103-UGLITO-PW.png (95.1 KB, 57 views)
__________________
www.diysubwoofers.org

 4th November 2018, 08:27 AM #10 mwmkravchenko   Mark Kravchenko diyAudio Member     Join Date: Jan 2002 Location: Perth Canada The guys behind the parameters we use were smart to stae that small signal data only was important. Among many reasons are the differences in the magnetic flux saturation in the steel in a motor structure. As the coil moves up and down it is not in exactly the same conditions all along the stroke. Keeps things interesting when designing a driver. But those wonderful small signal specifications are exactly that. Small signal. Your on your own when you try and calculate for higher power responses. LinearX had a program called LEAP that was much more accurate for higher power simulations of vented and sealed enclosures. Not sure if the program was applicable to bandpass enclosures. Also there is a program that runs through a spreadsheet called Unibox. It is quite accurate as well. But not applicable to bandpass enclosures. __________________ Mark www.kravchenko-audio.com

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules
 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Site     Site Announcements     Forum Problems Amplifiers     Solid State     Pass Labs     Tubes / Valves     Chip Amps     Class D     Power Supplies     Headphone Systems Source & Line     Analogue Source     Analog Line Level     Digital Source     Digital Line Level     PC Based Loudspeakers     Multi-Way     Full Range     Subwoofers     Planars & Exotics Live Sound     PA Systems     Instruments and Amps Design & Build     Parts     Equipment & Tools     Construction Tips     Software Tools General Interest     Room Acoustics & Mods     Music     diyAudio.com Articles     Car Audio     Everything Else Member Areas     Introductions     The Lounge     Clubs & Events     In Memoriam The Moving Image Commercial Sector     Swap Meet     Group Buys     The diyAudio Store     Vendor Forums         Vendor's Bazaar         Sonic Craft         Apex Jr         Audio Sector         Acoustic Fun         Chipamp         DIY HiFi Supply         Elekit         Elektor         Mains Cables R Us         Parts Connexion         Planet 10 hifi         Quanghao Audio Design         Siliconray Online Electronics Store         Tubelab     Manufacturers         AKSA         Audio Poutine         Musicaltech         Holton Precision Audio         CSS         exaDevices         Feastrex         GedLee         Head 'n' HiFi - Walter         Heatsink USA         miniDSP         SITO Audio         Twin Audio         Twisted Pear         Wild Burro Audio

 Similar Threads Thread Thread Starter Forum Replies Last Post tiefbassuebertr Analog Line Level 10 16th July 2018 02:55 PM hamradioman Solid State 0 21st August 2015 03:24 AM Gwho Subwoofers 7 15th October 2013 02:11 AM JohnS Solid State 51 13th December 2009 07:42 PM Hybrid fourdoor Music 0 21st September 2003 11:22 AM

 New To Site? Need Help?

All times are GMT. The time now is 03:22 AM.