ACA 1.6 Ground wire to PCB

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi,
building ACA 1.6 as first timer. Also new to electronics wiring like this.
https://d17kynu4zpq5hy.cloudfront.net/igi/diyaudio/QQjPnBAxHbVrfbCY.huge shows 2 lengths of BLACK single strand wires to connect the ground buss to later connect to the power GND on the PCBs. The kit does not have this. There is red, green and white as single strand. There is red and black thick multi-strand, but they appear too thick for this purpose. Use the green single strand?
-Ses
 
Black wire

Hi,
building ACA 1.6 as first timer. Also new to electronics wiring like this.
https://d17kynu4zpq5hy.cloudfront.net/igi/diyaudio/QQjPnBAxHbVrfbCY.huge shows 2 lengths of BLACK single strand wires to connect the ground buss to later connect to the power GND on the PCBs. The kit does not have this. There is red, green and white as single strand. There is red and black thick multi-strand, but they appear too thick for this purpose. Use the green single strand?
-Ses
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.