Will describe and document the build of the two unit's each holding 4 channels of a Telos390 clone.
Tarasque Member Joined 2002 2018-07-30 10:30 am #1 2018-07-30 10:30 am #1 Will describe and document the build of the two unit's each holding 4 channels of a Telos390 clone. Attachments Telos kast.jpg 715.3 KB · Views: 645 ••• More options Share L Luke Member Joined 2001 2018-07-30 11:00 am #2 2018-07-30 11:00 am #2 several times I have thought about building Telos Clones, which pcbs are you using? ••• More options Share Tarasque Member Joined 2002 2018-07-30 11:59 am #3 2018-07-30 11:59 am #3 These ones: http://www.diyaudio.com/forums/solid-state/304699-goldmund-wiki-build-2017-a.html#post5008512 ••• More options Share L Luke Member Joined 2001 2018-07-31 7:15 am #4 2018-07-31 7:15 am #4 hi Tarasque, I have followed that thread but dont recall pcbs, who sells these boards? ••• More options Share Tarasque Member Joined 2002 2018-07-31 9:41 am #5 2018-07-31 9:41 am #5 I use the bottom right 2 boards. Erikovski was selling them. ••• More options Share Tarasque Member Joined 2002 2018-08-10 11:47 am #6 2018-08-10 11:47 am #6 The internals the internals Attachments internals Telos.jpg 979.8 KB · Views: 480 ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build Top Bottom
L Luke Member Joined 2001 2018-07-30 11:00 am #2 2018-07-30 11:00 am #2 several times I have thought about building Telos Clones, which pcbs are you using? ••• More options Share Tarasque Member Joined 2002 2018-07-30 11:59 am #3 2018-07-30 11:59 am #3 These ones: http://www.diyaudio.com/forums/solid-state/304699-goldmund-wiki-build-2017-a.html#post5008512 ••• More options Share L Luke Member Joined 2001 2018-07-31 7:15 am #4 2018-07-31 7:15 am #4 hi Tarasque, I have followed that thread but dont recall pcbs, who sells these boards? ••• More options Share Tarasque Member Joined 2002 2018-07-31 9:41 am #5 2018-07-31 9:41 am #5 I use the bottom right 2 boards. Erikovski was selling them. ••• More options Share Tarasque Member Joined 2002 2018-08-10 11:47 am #6 2018-08-10 11:47 am #6 The internals the internals Attachments internals Telos.jpg 979.8 KB · Views: 480 ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build Top Bottom
Tarasque Member Joined 2002 2018-07-30 11:59 am #3 2018-07-30 11:59 am #3 These ones: http://www.diyaudio.com/forums/solid-state/304699-goldmund-wiki-build-2017-a.html#post5008512 ••• More options Share L Luke Member Joined 2001 2018-07-31 7:15 am #4 2018-07-31 7:15 am #4 hi Tarasque, I have followed that thread but dont recall pcbs, who sells these boards? ••• More options Share Tarasque Member Joined 2002 2018-07-31 9:41 am #5 2018-07-31 9:41 am #5 I use the bottom right 2 boards. Erikovski was selling them. ••• More options Share Tarasque Member Joined 2002 2018-08-10 11:47 am #6 2018-08-10 11:47 am #6 The internals the internals Attachments internals Telos.jpg 979.8 KB · Views: 480 ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build Top Bottom
These ones: http://www.diyaudio.com/forums/solid-state/304699-goldmund-wiki-build-2017-a.html#post5008512
L Luke Member Joined 2001 2018-07-31 7:15 am #4 2018-07-31 7:15 am #4 hi Tarasque, I have followed that thread but dont recall pcbs, who sells these boards? ••• More options Share Tarasque Member Joined 2002 2018-07-31 9:41 am #5 2018-07-31 9:41 am #5 I use the bottom right 2 boards. Erikovski was selling them. ••• More options Share Tarasque Member Joined 2002 2018-08-10 11:47 am #6 2018-08-10 11:47 am #6 The internals the internals Attachments internals Telos.jpg 979.8 KB · Views: 480 ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build Top Bottom
Tarasque Member Joined 2002 2018-07-31 9:41 am #5 2018-07-31 9:41 am #5 I use the bottom right 2 boards. Erikovski was selling them. ••• More options Share Tarasque Member Joined 2002 2018-08-10 11:47 am #6 2018-08-10 11:47 am #6 The internals the internals Attachments internals Telos.jpg 979.8 KB · Views: 480 ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build Top Bottom
Tarasque Member Joined 2002 2018-08-10 11:47 am #6 2018-08-10 11:47 am #6 The internals the internals Attachments internals Telos.jpg 979.8 KB · Views: 480 ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build Top Bottom
Tarasque Member Joined 2002 2019-02-02 2:04 pm #7 2019-02-02 2:04 pm #7 Finally had some time to continue. Build the powersupply boards for the first 4 channels. ••• More options Share Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build
Tarasque Member Joined 2002 2019-02-02 2:08 pm #8 2019-02-02 2:08 pm #8 pics Pics of the powwersupply caps Attachments IMG_0342.jpg 890.3 KB · Views: 362 IMG_0343.jpg 682.9 KB · Views: 345 IMG_0344.jpg 907.1 KB · Views: 313 ••• More options Share Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home Amplifiers Solid State GM Telos 390b build
Tarasque Member Joined 2002 2019-03-31 7:59 pm #9 2019-03-31 7:59 pm #9 the amp board factory These are the bords going to power the Orions Attachments IMG_0403.jpg 1 MB · Views: 186 IMG_0399.jpg 969.5 KB · Views: 175 ••• More options Share Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
Tarasque Member Joined 2002 2019-03-31 8:00 pm #10 2019-03-31 8:00 pm #10 Testing 123 Testing 123 Attachments IMG_0398.jpg 850.7 KB · Views: 201 ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
fab Member Joined 2004 fabaudio.online Paid Member 2019-03-31 9:20 pm #11 2019-03-31 9:20 pm #11 These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab ••• More options Share Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
These are really nice pcbs you have. Just wondering if they come from Goldmund because pcb marking seems to show that... fab
Tarasque Member Joined 2002 2019-04-01 10:07 pm #12 2019-04-01 10:07 pm #12 These are boards from Taiwan. Really nice like 3oz copper and gold plated. 2mm FR4 base ••• More options Share fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
fab Member Joined 2004 fabaudio.online Paid Member 2019-04-03 4:02 am #13 2019-04-03 4:02 am #13 If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab ••• More options Share Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
If they are not genuine from Goldmund then you should consider cover the Goldmund logo and name and advise the seller of doing so... Fab
Tarasque Member Joined 2002 2019-04-03 8:49 am #14 2019-04-03 8:49 am #14 As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire. ••• More options Share
As this is strictly for my private use and without any aim for profit, I feel free to copy the Goldmund design and tweak it to my desire.