Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

LPF function dependent on phase?
LPF function dependent on phase?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 7th October 2003, 07:30 PM   #1
Lusso5 is offline Lusso5  United States
diyAudio Member
Lusso5's Avatar
Join Date: Jul 2003
Location: Houston, TX
Default LPF function dependent on phase?

I was testing a Dynaudio sub last night, and could hear higher frequencies making it past the LPF. They were very insignificant, and very "distant" sounding. Couldn't hear them without putting my ear right up to the driver (at low volume of course).

The upper-bass sounded a bit muddy, so I checked my settings, LPF: 80hz, OK that is where I wanted it. Phase: REV, ahh I was running the driver out of phase. Switched it back, much better.

Here is the wierd part - when I switched the driver back in phase, those freq. were gone, and it seemed the LPF was working properly.

Do x-overs usually allow a little residual freq. to make it through, at very low levels? If so, what would the phase of the driver have to do with cutting that out?
  Reply With Quote
Old 7th October 2003, 08:41 PM   #2
PMA is offline PMA  Europe
diyAudio Member
PMA's Avatar
Join Date: Apr 2002
Location: Prague
It depends on the order of the LPF.
1st order -6dB/octave, 2nd order -12dB/octave, 3rd order -18dB/octave. The lower order the more frequencies above cut-off pass through.
Phase: 1st order LPF has phase angle of -45 at cut-off frequency etc.
  Reply With Quote


LPF function dependent on phase?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FDNR in active filters (Frequency Dependent Negative Resistor) peranders Parts 41 19th February 2011 07:23 PM
KEF driver phase and the H-B generated phase dlr Multi-Way 11 24th April 2007 12:56 PM
Amp Will Not Function prorms Solid State 16 2nd December 2006 09:26 PM
Technical Discussion about Frequency Dependent Terminal Impedance dkemppai Full Range 22 18th August 2005 02:32 AM
dipole sub H-Frame, phase or opposite phase ? mbon Multi-Way 6 19th June 2004 09:36 PM

New To Site? Need Help?

All times are GMT. The time now is 06:34 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio