except
outs you have to look the overall of the machine ...hapend to me before that rectifier was shorted ( twice ) and of cource if outs are gone drivers is also possible .....ofset and idle should be checked ...and goes on
it could be from a very easy thing to a very difficult task .....
outs you have to look the overall of the machine ...hapend to me before that rectifier was shorted ( twice ) and of cource if outs are gone drivers is also possible .....ofset and idle should be checked ...and goes on
it could be from a very easy thing to a very difficult task .....
hey all, thanks for everyones help so far!! It is set to 240v which is the correct voltage for australia...the amp is in storage, i'll get it tomorrow or the next day to check to see if the internal fuses have also blown. The one i was referring to was on the rear panel.
Do i need any special equipment to check the BIAS and DC offset?? any pointers on how to do this??
Cheers!
Do i need any special equipment to check the BIAS and DC offset?? any pointers on how to do this??
Cheers!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.