Hi
I have a perfectly functional toroidal transformer with dual primaries and dual secondaries (I took this out of a Niles SA 100 subwoofer amp).
On conencting it up, the no load secondary voltages measure around 35 to 36 V. I do not know the total VA, but guessing from the size its probably at least 300VA. Its about as big as a Avel 330VA, 25V+25V. Diameter is roughly 4 1/2 inches, height is roughly 1 7/8 to 2 inches. I have all the mounting parts as shown in the photos including a enclosure for shielding.
please make a reasonable offer + shipping from 94025.
thanks
Sridhar
I have a perfectly functional toroidal transformer with dual primaries and dual secondaries (I took this out of a Niles SA 100 subwoofer amp).
On conencting it up, the no load secondary voltages measure around 35 to 36 V. I do not know the total VA, but guessing from the size its probably at least 300VA. Its about as big as a Avel 330VA, 25V+25V. Diameter is roughly 4 1/2 inches, height is roughly 1 7/8 to 2 inches. I have all the mounting parts as shown in the photos including a enclosure for shielding.
please make a reasonable offer + shipping from 94025.
thanks
Sridhar
Attachments
Attention Packard
Packard, you e-mailed me regarding this toroid, I am unable to reach you as mails keep bouncing back, please contact me through an alternate e-mail address.
thanks
Sridhar
Packard, you e-mailed me regarding this toroid, I am unable to reach you as mails keep bouncing back, please contact me through an alternate e-mail address.
thanks
Sridhar
Transformer still available
The toroid is still available. I have had a couple of enquiries but no followthrough on them
The toroid is still available. I have had a couple of enquiries but no followthrough on them
- Status
- Not open for further replies.