diyAudio (
-   Subwoofers (
-   -   Decware DIY Bandpass Horn subs (

Will 30th September 2001 09:46 AM

Has anyone out there built the bandpass horn DIY subs published in before ? Currently I have 2 10" long excursion drivers and I don't have its T/S parameters. In the website itself, seems that there are some easy to follow instructions to derive the dimensions of the subs (with lots of graphics) without mentioning a single word of requiring any driver parameters.... All it needs is a 10 driver to fit into the enclosure. Isn't this a DIY heaven ? Cheers....

kelticwizard 14th October 2001 02:34 PM

The website says there s a support forum for that enclosure specifically. You might try that.

If you don't have the Thiele-Small specs for any speaker, try this site: Usually, the manufacturer and model number are printed on the speaker itself.

Good luck!

Will 15th October 2001 10:14 AM

thanks for the info.

All times are GMT. The time now is 11:47 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio