Does anyone have any experience with this CD-drive?
I can´t find any schematics anywhere for this one.
It spins up, but very slow like 1/4 of normal speed reading the index. After 5-10 seconds it stops, and after some more seconds, display reads "No Disc".
My eye caught C14 in the powersupply (after regulator), 1000uF/16volt, which had almost opened fully on top. Changed it, but no difference.
Have tried to exchange the Mecha with a brand new one, never used. Same issue = slow disc-speed.
The Mecha is a Samsung with SOH-AAV F11 laser.
Would be nice, if someone had tried this also
I can´t find any schematics anywhere for this one.
It spins up, but very slow like 1/4 of normal speed reading the index. After 5-10 seconds it stops, and after some more seconds, display reads "No Disc".
My eye caught C14 in the powersupply (after regulator), 1000uF/16volt, which had almost opened fully on top. Changed it, but no difference.
Have tried to exchange the Mecha with a brand new one, never used. Same issue = slow disc-speed.
The Mecha is a Samsung with SOH-AAV F11 laser.
Would be nice, if someone had tried this also
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.