Banned
Joined 2002
Banned
Joined 2002
Banned
Joined 2002
wait wait...
fix the bridge orientation or you'll ruin something..
I'm not sure from your response that you understood me..
I said "yes" there is a problem..
The double cathode band part of each bridge must be to the positive of the capacitor bank..
Your schematic does not show that..
Sorry if I'm re-hashing what you already know, but I don't want you to blow sumptin up..
Sully
fix the bridge orientation or you'll ruin something..
I'm not sure from your response that you understood me..
I said "yes" there is a problem..
The double cathode band part of each bridge must be to the positive of the capacitor bank..
Your schematic does not show that..
Sorry if I'm re-hashing what you already know, but I don't want you to blow sumptin up..
Sully
Banned
Joined 2002
Please remember that the schematic i posted was just a simple layout to ask about the bridge rectifiers layout and wiring. i know how to use them and hook them up i was just asking if it will cause any problems piggy backing 2 of them. i know the pos and neg's of the bridge and the 2 ac's one's. if you want a close up let me know ill show you. : O )
Banned
Joined 2002
Banned
Joined 2002
actual i just hooked up the transformer i have and up to this new cap bank. and it is 43.8v 0 43.9v
I'm using a Plitron 500va tranny with extra shielding.
Im hoping that these freds your sending me peter will work with this setup.. as i want to build the best psu for my little blue amp's that i have here. ; O )
I'm using a Plitron 500va tranny with extra shielding.
Im hoping that these freds your sending me peter will work with this setup.. as i want to build the best psu for my little blue amp's that i have here. ; O )
Banned
Joined 2002
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- NEED help power supply question.