Have anyone tested SAMWHA for Audio capacitors ?
http://www.farnell.com/datasheets/28003.pdf
Farnell seems that no longer stock these. Is any other place, in Europe, where to buy such caps ?
Regards,
Tibi
http://www.farnell.com/datasheets/28003.pdf
Farnell seems that no longer stock these. Is any other place, in Europe, where to buy such caps ?
Regards,
Tibi
Shaun said:I have use their low esr (for switchmode PSU's) 105degC caps as reservoir caps in my power amp... 22000uF 35V they were. No problems to report.
Thanks Shaun for your response !
My question is related only to SAMWHA for Audio capacitors, not other series which I know that they are reliable.
Are SAMWHA for Audio same as good as NICHICON KG ?
Regards,
Tibi
Originally posted by tvicol Are SAMWHA for Audio same as good as NICHICON KG ?
Hi Tibi
I'm not familiar with the "for audio" caps. Actually the Samwha caps I used were samples that we had been evaluating at my old job. This was for switch-mode applications. I figured they should be good enough for audio, and they were OK.
0.1 Ohms and 1.3% loss is terrible
I have some 13000µF Nichicons hier with manufacturing-stamp 70110 which meassure 8102/8430µF with 1,9%/1,3% losses and 30mOhm ESR... Replaced them with 22mF LNT with the same terminal spacing and size - it's like night and day...
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- Samwha for audio