Remember CV`s 1215? what about a RF 1012? ;o)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Do any of you remember Cervin Vegas 1215?
Its a tower with a 15" in the bottom. a 12" at the top of the front baffle and a 6" midrange + a 1" tweeter.

An externally hosted image should be here but it was not working when we last tested it.

Pic are from a sligthly different version with dual 4,5" midranges
and black finish instead of the better looking walnut finish

I never was too found of the sound, but the look appealed to me.

So i consider too use some of the car audio drivers i have stored for a similar construction.

12" Rockford Fosgate RFR 2215 w 1000Wrms power handling in a ported cavity with driver and ports facing the floor (dual 4ohm coils make 8 ohm possible)
From 27-80hz

10" Rockford Fosgate RFP 1810 w 200Wrms powerhandling in a sealed cavity in the top of the cabinet (single 8ohm coil)
from 80-250hz

6,5" Macrom 59.17 w 120 Wrms powerhandling in a sealed cavity (4ohm) from 250-3000hz.

Finally a Macrom large flanged 1,2" softdome from 3000hz and up

Both Macrom drivers are made by Morel
All these drivers are in my opinion of superior quality compared too what CV used.


Any comments?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.