Hi. Bonjour. Translated the best I can.
After years of DIY web surfing and the Overnight Sensation (Paul Camody).
I also had a Triton Kit (Jeff Bagby).
My ‘Sous dominante’ project is my contribution to all sharing so much DIY info online , as the Open Source REW and so much more.
Of course, the best audio quality to the dollar is the objective.
Drivers from Sbacoustics, Tweeter SB19ST-C000-4 and Woofer 6 " SB16PFC25-08.
With the chosen components in January 2019, the pair cost less than $200 Canadian.
The resulting sound fullfill much more than expected.
Your’s to give it a try.
The Bass Reflex measure 7 3⁄4 in. arge, 13 in. hight and 10 in. deep.
The port is ABS 1 1⁄2 by 3 1⁄2 including 3⁄4 in back hole.
The closed box is 9 in. deep.
In both cases a reinforment bar up by 2/3 is also used to old the Crossover.
The inside volume is about 10 litre. Stuffing up to you. For me, felt and Dacron did it.
After years of DIY web surfing and the Overnight Sensation (Paul Camody).
I also had a Triton Kit (Jeff Bagby).
My ‘Sous dominante’ project is my contribution to all sharing so much DIY info online , as the Open Source REW and so much more.
Of course, the best audio quality to the dollar is the objective.
Drivers from Sbacoustics, Tweeter SB19ST-C000-4 and Woofer 6 " SB16PFC25-08.
With the chosen components in January 2019, the pair cost less than $200 Canadian.
The resulting sound fullfill much more than expected.
Your’s to give it a try.
The Bass Reflex measure 7 3⁄4 in. arge, 13 in. hight and 10 in. deep.
The port is ABS 1 1⁄2 by 3 1⁄2 including 3⁄4 in back hole.
The closed box is 9 in. deep.
In both cases a reinforment bar up by 2/3 is also used to old the Crossover.
The inside volume is about 10 litre. Stuffing up to you. For me, felt and Dacron did it.