Hey Guys,
I am getting closer to starting my theater build and have all the components I need. Just need to finalize my design for the in wall speakers.
Some background on the project:
110" Projector Screen
Epson 5020
Dayton 12" Reference Sub with 250 watt Dayton Amp
5 channel Zaph Audio with za5.3 for L/C/R and za5.2 for rears
za 5.3 L & R
za 5.3 center
za5.2 rears
drawings below. My size requirements are limiting both the depth and the width of these speakers, so I am compensating with the height at 29". These are using the in wall crossover from madisound, so I am not overly concerned with the baffle size (should I be?)
Please let me know what you think of these drawings...THANKS
I am getting closer to starting my theater build and have all the components I need. Just need to finalize my design for the in wall speakers.
Some background on the project:
110" Projector Screen
Epson 5020
Dayton 12" Reference Sub with 250 watt Dayton Amp
5 channel Zaph Audio with za5.3 for L/C/R and za5.2 for rears
za 5.3 L & R
za 5.3 center
za5.2 rears
drawings below. My size requirements are limiting both the depth and the width of these speakers, so I am compensating with the height at 29". These are using the in wall crossover from madisound, so I am not overly concerned with the baffle size (should I be?)
Please let me know what you think of these drawings...THANKS
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.