Hello All,
Been trying to put together a design. I am using Hivi M5a 5". I want to add a Zobel network to the crossover design. However, I am struggling to find the LE T/S parameter for this driver. Without this I will not be able to design the Zobel.
Can you please share if you have the information. Thanks so much.
Been trying to put together a design. I am using Hivi M5a 5". I want to add a Zobel network to the crossover design. However, I am struggling to find the LE T/S parameter for this driver. Without this I will not be able to design the Zobel.
Can you please share if you have the information. Thanks so much.
Zobel = 10 OHMS + 8uF
Hello rmjeeves
Check out my HiVi M5a 2-way at: ROBIN
T/S measured with LMS Delta mass at: HiVi T/S LMS
Quite a nice midwoofer. Have fun.
Hello rmjeeves
Check out my HiVi M5a 2-way at: ROBIN
T/S measured with LMS Delta mass at: HiVi T/S LMS
Quite a nice midwoofer. Have fun.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.