Have been interrested in building a hornloaded plasmatweeter eversince I read the Ulrich Haumannpages on plasmatweeter.de.
I was thinking of making the firstpart of the horn from bronze, I have a metallathe so that must be possible to do, and the secondpart and epoxyhorn. I already have a mould for that.
The biggest challenge will be that I want to have it run down to 3khz or possibly lower.
Futhermore I ask myself if it would be possible for the greatestpart to make it solidstate except for the rfoutput tube.
I am not an enigneer myself so for me its not possible to design a circuit.
Any advise is welcome please.
With regards Roy
I was thinking of making the firstpart of the horn from bronze, I have a metallathe so that must be possible to do, and the secondpart and epoxyhorn. I already have a mould for that.
The biggest challenge will be that I want to have it run down to 3khz or possibly lower.
Futhermore I ask myself if it would be possible for the greatestpart to make it solidstate except for the rfoutput tube.
I am not an enigneer myself so for me its not possible to design a circuit.
Any advise is welcome please.
With regards Roy
Attachments
Try over here, these guys are into the esoteric stuff:
http://www.diyaudio.com/forums/forumdisplay.php?s=&forumid=54
http://www.diyaudio.com/forums/forumdisplay.php?s=&forumid=54
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.