new to the boards.
found the forums through searching for a number of resources relating to upgrading, complete rebuild from scratch minus arm of a new project expression deck, and an isolation platform/supports.
particulalrly interested in anything relating to platter bearings, plinth design and any resources for good magnets for a mag lev support, have the design finished to a stage where i need to choose magnets to fix the final design.
any responses from tweakers kindly received, i'm an industrial design graduate so have the engineering but not any required electronics.
cheers
found the forums through searching for a number of resources relating to upgrading, complete rebuild from scratch minus arm of a new project expression deck, and an isolation platform/supports.
particulalrly interested in anything relating to platter bearings, plinth design and any resources for good magnets for a mag lev support, have the design finished to a stage where i need to choose magnets to fix the final design.
any responses from tweakers kindly received, i'm an industrial design graduate so have the engineering but not any required electronics.
cheers
Welcome! There are plenty of threads on turntables (ouch!), so you should find this forum useful. Meanwhile, please bear in mind that it is an international forum, so grammatically correct English is more courteous to those for whom English is not their native language (it also looks bad if we write worse English than they do!).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.