New to Forum, love 2A3's, built a couple of amps

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Have built a couple of amps and followed this forum for ideas, finally signed up. My favorite schematics are from JE Labs. Have some photos of my projects at http://oldheadphones.com on the Tube Amp Projects page.
Got started by restoring vintage tube radios and building crystal radios. Just finished building a guitar amp from a friend, found the Fender schematic at schematic heaven. I am also an avid swimmer, hence the handle.
Scott's Crystal Radios

An externally hosted image should be here but it was not working when we last tested it.

Used a couple of vintage transformers on this one.
Scott aka scottswim
 
photos here of the amps

Front
a1amp31.JPG


Wood is Brazilian Cherry aka Jatoba wood, and panel is Garolite

Back of amp showing the cut out for the power and audio inputs

a1amp33.JPG
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.