• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Transformer for Red Baron V5 & Tube-I-zator V3.1

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
aguaazul

aguaazul

Member
Joined 2012
I have sourced a great transformer for this project. Like any other buy, the multiple cost of 5 to 10 is really a great price. A PM from Oliver OK'd this GB and he even helped me get the international voltage fixed.

Here are the details.

Toroidal Power Transformer

Dual Primariess for use in USA & International input.
PRIMARIES ARE INSIDE A SLEEVE.

7 Secondaries:
4 x 12V @ 1A, 1 x 20V @ 1A, 1 x 9V @ 2A, 1 - 150V @ .1A.

ISO 9001:2008 - Certified - 3 year warranty.
Company has 30 years of Design & Manufacturing experience.

LEADS: S=Multistranded wire. Length tolerance: +/- 1/2".
Manufacturing tolerance is +/- 3%.
NOMINAL SUPPLY: 117/234V +/-10%
RATED PRIMARY CURRENT: 1.0/0.5A
RATED FREQUENCY: 50/60 Hz
TEMP. RISE AT RATED LOAD: 38 ºC

DIMENSIONS/WEIGHT: OD = 3.9" - H = 1.8" - WEIGHT = 3.1 LBS
MOUNTING: WASHER/PADS = 70mm - THICKNESS = 0.05" - HOLE DIAMETER = 0.25"
Mounting Hardware: Includes a metal washer and 2 rubber pads.

CORE DATA: CORE # 900140 - CORE LOSS = 0.9 W - NO-LOAD CURRENT = 7 mA

Dimensions stated above are nominal. Tolerance is +/-10%.

OTHER SPECIFICATIONS: Transformer meets UL506, EN 61558 and CSA C22.2 No. 66 standards. ROHS compliant. Class B insulation.

Cost each before tax and shipping for 5 units is: ~$150. Cost each for 10 units it gets down to ~$115

If there is interest, I will get costs, for shipping & handling information put together. I am in California, USA

Thanks for looking,
Aguaazul
 
J

jcastellano

Member
Joined 2011
Hi Aguaazul,

Why four 12v secs? If I am correct, 3 are needed... +5, -5 and 3.3 volts.
The 20 volts sec is for the -15 volts and the other two left are for the Tube-I-Zator.

Is that fourth 12v for accessories like spdif to i2s ?

Maybe is a dumb question but I was curious....

Regards

Jorge
 
aguaazul

aguaazul

Member
Joined 2012
Transformer for Red Baron V5 & Tube-I-zator V3.1 - Update

I just ordered a prototype in USA only voltage. When it get's to 10, I'll put together final pricing. The company will handle all the shipping directly.

On the secondary wiring I chose to have the + voltage a solid color and the 0 voltage a corresponding color with a stripe.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom