ALPAIR 6 RMS is 15W MAX is 30W
RS100 RMS is 30W MAX is 60W
I suppose that a mono AMP with 60W would work well?
Power ratings are near meaningless. There are no standards by which to measure them and 2 brands can have quite different numbers and yet be the same. Best to ignore them.
We recommend a minimum of 10w for the Alpair 6… it has an arrestor built in the will audiably tell you when to turn it down… more power is usually better than too little but there are lots of other factors that are important.
dave
What Dave said. Whatever driver you go for, forget the RMS values. All they really tell you is the point at which the voice coil will fry. They'll have reached their mechanical excursion limits in any box you're likely to use at a fraction of that, unless you electrically cut output < tuning.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.