I'd like to know if it is possible to utilize the Sowter 9335 pot-trans in a DAC (PCM-63) having as I/V converter a R of 10 ohm.
The 9335 should have its primary connected in parallel with the R and its secondary connected to the outputs.
The cables between DAC and preamplifier should be no longer than 30 cm.
The 9335 should have its primary connected in parallel with the R and its secondary connected to the outputs.
The cables between DAC and preamplifier should be no longer than 30 cm.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.