Dear, my idea is that I2S connects TDA1307 to TDA1547, but there are restrictions on newcomer technology. I would like to ask everyone through the platform. I would like to ask how the TDA1307 format I2S, please share your thoughts, I would be more grateful if the cable map. Thank you
My email limingdevip@gmail.com
My email limingdevip@gmail.com
Is there something in the TDA1307 datasheet you don't understand? I2S input is 20bits, output is single bit (DSD-like).
hi Good evening, I want to know what method the soft control needs to do with this IC.
What are you trying to do?
The 1307 does not send data to the 1547 via I2S, it is sent by separate left & right bitstreams and a clock.
If you want to change the 1307's input mode, you need to write to its internal registers using an external microcontroller connected to pins 38,39 & 42. The default setting for input mode is I2S upto 20bits.
The 1307 does not send data to the 1547 via I2S, it is sent by separate left & right bitstreams and a clock.
If you want to change the 1307's input mode, you need to write to its internal registers using an external microcontroller connected to pins 38,39 & 42. The default setting for input mode is I2S upto 20bits.
What are you trying to do?
The 1307 does not send data to the 1547 via I2S, it is sent by separate left & right bitstreams and a clock.
If you want to change the 1307's input mode, you need to write to its internal registers using an external microcontroller connected to pins 38,39 & 42. The default setting for input mode is I2S upto 20bits.
Thanks Reply
Yes, I have to enter I2S to 1307
1307 default is I2S mode, then I don't have to do anything. Directly introduce I2S signal into 1307.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Digital Line Level
- Please help me with my homework TDA1307+TDA1547