Unlike most eval boards which give access to half the data lines or have an inconvenient implementation (wrong format, too many/few channels, onboard codec) this one is a bare minimum with every data line on the pin header.
Now the bad news... Unfortunately its available only on taobao.
SIGMADSP ADAU1452???-???
I used superbuy as the in-between, total shipped was ~$27 and included inspection pictures taken with rusty potato. (attached)
In my setup it'll be combined with a few adc/dac modules, wm8804 (wondom module), csra64215 and a wondom 1701 module.
MediaWorks also makes a codec board I am interested in, but its designed for SHARC boards and costs more than I can justify with my current surplus of such components:
MW-AUDIO-EXT ?????-???
Now the bad news... Unfortunately its available only on taobao.
SIGMADSP ADAU1452???-???
I used superbuy as the in-between, total shipped was ~$27 and included inspection pictures taken with rusty potato. (attached)
In my setup it'll be combined with a few adc/dac modules, wm8804 (wondom module), csra64215 and a wondom 1701 module.
MediaWorks also makes a codec board I am interested in, but its designed for SHARC boards and costs more than I can justify with my current surplus of such components:
MW-AUDIO-EXT ?????-???
Attachments
Nice little board for the DIYer as it removes the need to solder that PITA ADAU1452 package at a good price! Ideally needs a decent "motherboard" designing to get the most out of it? A decent 2/4 channel ADC and an 8 channel DAC and it would make for a nice crossover for a pair of speakers.
I like going all out playing with my own designs, but the price you can get fully assembled PCBs from the far east/China is quite amazing really.
I like going all out playing with my own designs, but the price you can get fully assembled PCBs from the far east/China is quite amazing really.
Agreed, unfortunately their codec board I mentioned is not pin compatible and a bit pricey ~$80+shp. There is an ad1938 board meant for another 1452 dsp board that could be about half the cost but it's construction and components are suspect.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.