This is a 17 X 8 chassis. Here is a pic of how I'm thinking of putting transformers on my 6B4G SET amp. The RCA boxes are where the power triodes will be on. and two circles on PCB are a driver and a rectifier.
On left I have end bells where power TX will be and on right those 2 are output TX. Is the orientation good or will be problem since I have heard power and output should be arranged 90 degrees from each other due to magnetic flux from power TX? Or it shouldn't be a problem since they are 9 inches apart?
On left I have end bells where power TX will be and on right those 2 are output TX. Is the orientation good or will be problem since I have heard power and output should be arranged 90 degrees from each other due to magnetic flux from power TX? Or it shouldn't be a problem since they are 9 inches apart?
An externally hosted image should be here but it was not working when we last tested it.