Hi everyone!
I have a small problem (or perhaps opportunity 😉
I am helping a friend to install a Skynet SMPS to his original Gaincard. As he wants to compare the SMPS with the Power Humpty I need to find a connector that fits the Gaincard power connector!
Does anyone know what the connector on the back of the Power Humpty is and where to source one?
Very thankful for any help!
I have a small problem (or perhaps opportunity 😉
I am helping a friend to install a Skynet SMPS to his original Gaincard. As he wants to compare the SMPS with the Power Humpty I need to find a connector that fits the Gaincard power connector!
Does anyone know what the connector on the back of the Power Humpty is and where to source one?
Very thankful for any help!
You can source it from Digi Key, part# A29694-ND
$5.28/pc
The wiring is as follows:
Brown (Pin 1): +VDC
Black/White (Pin2 and 3): +-VAC tied together at ground.
Blue (Pin 4): -VDC
$5.28/pc
The wiring is as follows:
Brown (Pin 1): +VDC
Black/White (Pin2 and 3): +-VAC tied together at ground.
Blue (Pin 4): -VDC
- Status
- Not open for further replies.