Rockford Fosgate T600-4

[caraudioguy2100]

Does anyone know if all the audio driverboards and outputs have to be in this amp in order for it to have output?

I’m working on 2 channel at a time and can’t get any output from any channel .

I know the amp won’t have output on the channels the outputs are missing from but the other 2 channels also have no output

 

[Perry Babin]

Do you have audio reaching all of the driver boards?

Contact Rockford to see if they will send you the schematic.

What driver board are they using for audio?

 

[caraudioguy2100]

I will check to see if the audio is reaching all of the driverboards .

The amp is using these audio driverboards

Fosgate will not release the schematic for this amp

 

[caraudioguy2100]

I will check to see if the audio is reaching all of the driverboards .

The amp is using these audio driverboards

Fosgate will not release the schematic for this amp

 

[caraudioguy2100]

Well I added all of the outputs in the amp and it has output .

Now to trouble shoot the amp since 1 channel plays perfect the other 3 channels have distorted output

 

[Perry Babin]

Post images of the distorted waveforms.