TMA T1000.1 Resistor value

[Tom7227]

Does anybody know what value this resistor is?
R202

Looks like 10 ohm 1 watt?

 

[Perry Babin]

It appears that there are two different amps with the same model number. This is what I have as the T1000.1.

Is that resistor connected directly across the speaker output or is it in series with a capacitor?

 

[Tom7227]

It is in series with a 10uf cap

 

[Perry Babin]

What's the tiny blue arrow on your image?

 

[Tom7227]

Points to the resistors that I need

 

[Tom7227]

I used a program called Snagit

 

[Perry Babin]

The blue arrowhead appear to point to the 10uF SMD cap.

 

[Tom7227]

I guess accuracy wasn't my game , supposed to point to R202

 

[Tom7227]

I didn’t notice the blue arrow, not supposed to be there.

 

[Perry Babin]

Which 10uf cap is the resistor in series with?

 

[RiLoWa]

I had one of these a few years ago. R202 wasn't an area of focus on my repair but maybe this picture will help. It looks like the one I had got a bit warm but I think you are correct that it is a 10 Ohm, maybe a 3 Watt?

 

[Tom7227]

That’s exactly what I needed. It’s actually a 1 watt, mine was cracked in half and missing. The adjacent 10uf caps had a high ESR, (2 ohms), and you can see my 2 are vented.

Thanks again