I have a pair of boards and would like to find the BOM.
These are the blue Peter Daniel F-5 boards
Please help!
Refer to Firstwatt F5 manual.
However most of the resistors are cmf50 not cmf55.
0.47 Source resistors use 3W Panasonic oxide film
100 Ohm feedback resistors use 3W Panasonic Oxide Film.
That covers most of it.
http://www.diyaudio.com/forums/group-buys/140306-f5-pcb-group-buy.html
See post #40. seems like there was an error on one of the BOMs, I think it concerned a mix up with fairchild mosfets, but it has been a long time. This thread is a good read, I used it with my F-5.
See also #447 for Peter's Schematic
Russellc
See post #40. seems like there was an error on one of the BOMs, I think it concerned a mix up with fairchild mosfets, but it has been a long time. This thread is a good read, I used it with my F-5.
See also #447 for Peter's Schematic
Russellc
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.