Go Back   Home > Forums > >

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Question to member Ouroboros
Question to member Ouroboros
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools
Old 16th February 2007, 03:16 AM   #1
TB is offline TB  United States
diyAudio Member
Join Date: Jun 2004
Location: Northern VA
Default Question to member Ouroboros

I have found one of your posts in this thread: http://www.diyaudio.com/forums/showt...=&pagenumber=3

You have posted schematic of PSU for floppy disk based motor for turntable. Will this PSU work also with Hard drive motors? I have nice two motors taken from hard drives used in servers. Those are self-contaned units ( I have noticed in majority of HD, rings with coils are glued to the base of the drive's motor well ). Bottom part of the motor is threaded and mounted to HD base with a nut. There are three connection pins in the center of the base. I guess, the ground is connected to the metal base of the motor. Those units would make great TT motor. I can make nice metal plate to mount those motors to. They should have a good power too. What I need is just good PSU.
Thanks for the help !!!
  Reply to this post


Question to member OuroborosHide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Member and Biema Q400 question Dalork Solid State 3 2nd February 2011 08:08 AM
New member introduction & question ianl Tubes / Valves 10 23rd October 2009 05:44 AM
New member with a question about horn loaded compression driver-type speakers... munkittrick Car Audio 15 27th May 2009 12:49 PM
New member with CD player question canetoad Digital Source 7 10th December 2007 08:28 PM
Question for Member from Singapore CM Alvinttt Digital Source 23 7th November 2003 09:44 AM

New To Site? Need Help?

All times are GMT. The time now is 03:46 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio