Repair/Retiping Zenn Hibino MCZ-7/MC-Z7 and MC-Z2/MCZ-2

[tiefbassuebertr]

I am looking arround for special companies here in Europe for restauration of the Models MCZ2 and MCZ7 (MC/Z-2 and MC/Z-7) from Dr. Hibino, labelled with "ZENN" so as "Klipsch".
I know
Van den Hul: Cartridge Repair, Modification and Re-Tipping: Available Services
but there is no contact and e-mail address.

Thank you for your advices.

Here some informations found on the web:
Zenn Hibino MCZ-7 MC-Z2
Turntable Forum :: Gallery
Turntable Forum :: View topic - Zenn / Klipsch Mcz-7 Mc Cartridge + Mct-200 Step Up Device
Successor:
Turntable Forum :: View topic - Hens Tooth
http://forums.klipsch.com/forums/storage/4/893393/DSCN09951.JPG
<meta name="description" content="Klipsch audio systems provide the true audio/video lover a wide variety of high performance loudspeakers and loudspeaker systems for music and home theater entertainment centers, including iPod speakers, multimedia s
auf der Vinyl Engine gibt es einen Test aus der HiFi News and Record Review September 1982 vom Zenn MCZ-7.
Naked Resource Audio
by the headline
"Nine exotic cartridge review"

 

[tiefbassuebertr]

no ideas?
If one want to send a PM, please use not the associated aera here, because I go not often in this aera. Please use my email address:
kirschner-hifi@tiefbasswiedergabe.de
thank you

 

[Swarky]

The Expert Stylus Co. in the UK retipped my Linn Troika and hundreds of others.
The name says it all. Not cheap but the best.
Soundsmith in the U.S. are also said to do a good job and cheaper.

 

[dario54]

I bought a damaged Denon 103 and got retipped, with new boron stylus by Torlai, Pickup Service di Torlai Roberto, pickupservice@torlai.it .

The job was so successful than a friend of mine, who was using ONLY high priced VdH cartridges, sold everything and bought a 103 R...

Of course I have NO connection with this business, just am a satisfied customer.

If you are living in Europe, Torlai is one of few retipping specialist in your continent, together with VdH, The Cartridge Man, just browse the net, check the offered options and compare prices, IMHO of course...

 

[dario54]

RE: VdH address

For what I know, you should contact your local VdH distributor and have your cartridge sent to him, for other specialists, you should send your cartridge directly to them, after due confirmation of job to be done, prices and timing.

 

[tiefbassuebertr]

Thank you very much for this addresses - I will send to all addresses an inquiry for a cost estimate.

 

[ANALOGIST]

My SUPEX was retipped by SOUNDSMITH and he did really very good job.I advise you that it is also important to change the cantilever if it is not already ruby.From the picture I am not sure from what material is yours.The retipping and new ruby cantilever cost me 250€ all inclusive.

 

[tiefbassuebertr]

My SUPEX was retipped by SOUNDSMITH and he did really very good job.I advise you that it is also important to change the cantilever if it is not already ruby.From the picture I am not sure from what material is yours.The retipping and new ruby cantilever cost me 250€ all inclusive.

Also a good advice.
Please note: The attached pictures are not my own cartridge devices - I have found on the web. Because such pictures are deleted after a short time (especially by ebay), I have save this examples here.

 

[steenhart]

Retipping

Look here I did a few here very nice prices the best you can find

Cartridge Retip Service

It's only only dutch.